• External Contributor

MIT Researchers Take One Step Closer to "Visually Perfect" 3D Printing With Variable-Gloss Printer..

A step closer to “visually perfect” 3D printing, huh? MIT’s whipped up an additive technique employing COTS varnishes with “spatially varying gloss patterns.” Glossier varnishes dry into a smoother surface while the larger polymers in matte varnishes can clog up the thin channels in 3D printer nozzles. MIT’s method involves initially printing a high gloss part with support structures covering the matte finish areas. The support material is removed to yieldthe required roughness of the final surface. Potential applications include museum grade fine art replicas and more realistic-looking prosthetics.

By: Hayley Everett, 3D Printing Industry

December 4, 2020


Researchers from the Massachusetts Institute of Technology (MIT) have developed a 3D printing system that uses off-the-shelf varnishes to finish objects with realistic, spatially varying gloss patterns.


Working with colleagues from Università della Svizzera italiana, the Max Planck Institute for Informatics, and Princeton University, MIT researcher and mechanical engineer Michael Foshey hopes the printer will bring the concept of “visually perfect” 3D printing closer to reality, where the difference between an object and its 3D printed replica is almost impossible to tell.


Potential applications for the developed halftoning technology could include fine art replicas for museums and creating more realistic-looking prosthetics.

Challenges to 3D printing varnishes

A surface’s glossiness refers to how much light it reflects; a high gloss surface is reflective while a low gloss or matte surface is unreflective. Glossier varnishes are less viscous than their matte counterparts and dry into a smoother surface. The larger polymers in matte varnishes, meanwhile, can clog up the thin channels in 3D printer nozzles.


Previous research has been conducted into how halftoning can improve the surface quality and color of 3D printed parts by Purdue University. The paper explored a halftoning algorithm that focused on optimizing individual voxels in relation to HP’s multi-jet fusion technology.


In 2018, German post-production solutions provider DyeMansion launched its VaporFuse Surfacing (VFS) technology, which gives a glossy finish to 3D printed parts by applying an industry-safe solvent that dissolves particles on their surface.

MIT’s variable gloss 3D printer

MIT’s method involves initially 3D printing an object with high gloss and support structures covering the areas where a matte finish is desired. The support material is then removed to achieve the required roughness of the final surface.


To do this, the researchers designed a printer with large nozzles that can deposit various-sized droplets of varnish with high viscosities and large particle sizes. Stored in a pressurized reservoir, the varnish is released onto the printing surface by the opening and closing of a needle valve. The droplet size can be controlled by altering the reservoir pressure and speed of the needle valve; the more varnish released, the larger the droplet.

To achieve spatially varied gloss, the researchers used a halftoning technique, arranging discrete varnish droplets in patterns that appear like a continuous surface when viewed from a distance. Then, they integrated one glossy, one matte, and one in-between varnish into the printer’s pre-programmed halftoning pattern to print continuous, spatially varying shades of gloss across the object’s surface.


The printer’s output is determined by a software pipeline developed by the team, in which a user selects a desired gloss pattern to be printed on an object. The printer runs a calibration process to choose the correct halftoning pattern to use in the final print job, based on the reflectance of the calibration patterns.


The researchers demonstrated the results on what they call “2.5D” objects, which are mostly-flat printouts with textures ranging half a centimeter in height. Next, the team will continue developing the technology for use on fully-3D objects, with the potential for further integration with commercial 3D printers in the future.


Further details of the study can be found in the article titled “Towards spatially varying gloss reproduction for 3D printing”, which will be presented at next month’s SIGGRAPH Asia conference. The study is co-authored by M. Foshey, M. Piovarči, W. Matusik, V. Babaei, S. Rusinkiewicz, and P. Didyk.

Recent Posts

See All

COVID-19 Relief on Its Way

After months of tense negotiations, Congress approved a bipartisan coronavirus stimulus package before it adjourned for the year, and President Donald Trump pledged to sign it. The measure combines $9